Accord offers a complete line of braided packing, sheet packing rubber packing, and flange gaskets.

Sheet packings are stocked in a variety of materials ranging from graphite, non-asbestos, PTFE, vegetable fiber, cork/neoprene and carbon fiber and are available in various thicknesses.

Rubber sheet packings are available in: red rubber, pure gum (live) rubber, Buna-N, neoprene sheets and closed cell sponge rubber. Rubber sheet packing is typically usually sold on 36" or 48" wide rolls and cut to lengths specified in yards.

Accord stocks a complete line of 150 lb. 1/8" and 1/16" thick ring gaskets, envelope gaskets, full face gaskets, and ring gaskets with tab. Additionally, woven PTFE gasket tape, allvalve expanded PTFE valve stem packing, metric and standard o ring kits and o ring cord, fiberglass cloth, fiberglass tape, fiberglass rope, spiral wound gasket, packing cutter, switchboard matting, anti-fatigue matting, rubber strip packing are all standard items stocked in Accord's warehouse.

Style 3500 / 3020 - Chemares Tank Lid Packing

CGG7xxxC

S09P033020View the catalog page, click here

Sizes: 15mm to 50mm (available in both square or rectangular sections); Temperature Limit: 100°C

Designed for use where the prevention of water ingress is as equally important as the prevention of spillage, Style 3020 can be used with tank hatches on ships, barges, road and rail transport. 3020 is resistant to acids, alkalis, oils, solvents, chemicals and edible products which makes it suitable for most known cargoes. Manufactured for Accord by a world leader in Marine Packings and Gaskets. The unique construction and properties of Style 3020 has made it the outstanding tank lid packing wherever chemical and solvent cargoes are carried.

It was developed in response to a growing demand for a universal tank lid packing, as a result of the dramatic increase in carrying of hazardous bulk liquid cargoes. Contains no asbestos. Provides an efficient seal that is resistant to all chemicals likely to be carried. Retains its resilience over many years. Meets all international regulations. Capable of "on-site" welding into a customized endless ring.

Unique construction. The center of 3020 Chemares is a core of special rubber for maximum chemical resistance. Around it is a protective layer of PTFE tape which is then surrounded by a thick cushion of defibrillated polypropylene that has corners constructed from the same materials braided into cords. Over the packing is a double layer of heavy duty PTFE tape with a final outer protection of braided PTFE yarn.

Style 3500 / 3020 is very flexible and will deform or expand to fill slight irregularities in tank or lid grooves. It is available in square or rectangular section as required and can be supplied in long length coils; ready cut to length; or in customized ready made rings to match your tank lid specifications.

Style 90 - "Ramie" Flax Packing

CGG7xxxC

Sizes: 1/8" to 1-1/2"; Temperature Limit: 212°F; pH Range: 6-8; Shaft Speed: to 1200 FPM.

Description: Square braided medium flax fibers paraffin treated and mineral oil lubricated.

Applications: General service packings recommended for cold water, cold oil and brine applications. Stern tubes, rudder posts and tail shaft liners and industrial applications where minimal shaft scoring rates are required.

Service: This packing has extremely low frictional characteristics where minimal shaft wear is essential. Style 90 is rot resistant and ideal for marine use, handling cold water, brine and cold oils.

 

Style 90G - Lubricated "Ramie" Flax Packing with Graphite

CGG7xxxC

S09P1View the catalog page, click here

Sizes: 1/8" to 1-1/2"; Temperature Limit: 212°F; pH Range: 6-8; Shaft Speed: to 1200 FPM.

Description: Square braided medium flax fibers paraffin treated with a petroleum based lubricant and graphite.

Applications: General service packings recommended for cold water, salt water, cold oil and brine applications. Stern tubes, rudder posts and tail shaft liners and industrial applica- tions where minimal shaft scoring rates are required.

Service: This packing has extremely low frictional character- istics where minimal shaft wear is essential.

Style 90T - Flax Packing with PTFE

CGG7xxxC

S09P2View the catalog page, click here

Sizes: 1/8" to 1-1/2"; Temperature Limit: 265°F; pH Range: 5-11; Shaft Speed: to 1970 FPM; Pressure: to 300 PSI in rotary pumps, 450 PSI static.

Description: Unique square braided flax fibers impregnated throughout with PTFE to seal the fibers, surface treated with a special break-in lubricant and dry PTFE particles.

Applications: Rotating shafts, stern tubes, and rudder posts.

Style 320 - Fiber Yarn Graphited Braided Packing

CGG7xxxC

Sizes: 1/4" to 1"; Temperature Limit: 500°F; pH Range: 4-10; Shaft Speed: to 2000 FPM.

Description: Interlock braided using long, white fibers which are impregnated with a petroleum-based oil and graphite compound. After braiding, the surface is graphited.

Applications: A good general service packing that ensures an excellent seal against brine, contaminated, hot and cold water, saturated steam, oils, solvents and weak acids. Recommended for use in centrifugal and rotary pumps and low pressure valve stems.

 

Style 325NA - Synthetic Fiber, Graphited and Lubricated Packing

CGG7xxxC

S09P3View the catalog page, click here

Sizes: 1/8" to 1"; Temperature Limit: 340°F; pH Range: 4-10; Shaft Speed: to 2000 FPM.

Description: An interlock braid using carded synthetic yarns thoroughly impregnated with a special petroleum based lubricant and graphite.

Applications: General service packing that adapts well to worn or scored shafts often found in older equipment. It assures an excellent seal against steam, brine, oil and mild acids and alkalies. Well suited for rotary and centrifugal pumps and some valves.

Style 1200AF - Non-Asbestos High Temperature Valve Stem Packing

CGG7xxxC

Sizes: 1/8" to 1"; Temperature Limit: 1200°F; pH Range: 2-12; Shaft Speed: to 200 FPM; Pressure: to 2500 PSI static.

Description: Style 1200AF is interlock braided, using a special high-temperature fiber glass, reinforced with Inconel® and heavily lubricated with graphite.

Applications: General valves, control valves, rods, expansion joints.

Service: 1200AF is a firm, high density, non-asbestos packing. It is recommended for use in steam, most chemicals, mild acids and alkalies.

 

Style 2000 - Fiber/PTFE Lubricated Packing

CGG7xxxC

S09P4View the catalog page, click here

Sizes: 1/8" to 1"; Temperature Limit: 500°F; pH Range: 2-13; Shaft Speed: to 3000 FPM.

Description: Style 2000 is manufactured from selected long fiber white fibers yarns in interlocked construction. It is PTFE-Impregnated yarn-by-yarn and is surface finished with PTFE suspensoid. A break-in lubricant is added to reduce shaft wear and eliminate glazing at start-up. Note: Available with wire reinforcement.

Applications: Style 2000 is an excellent multi-service packing for a wide range of uses throughout a plant. It is recommended for use in steam, water, solvents, mild acids and alkalis and most chemicals in rotary pumps, valves, rods, expansion joints, mixers and agitators.

Style 2290 - Pure PTFE Filament Packing

CGG7xxxC

S09P5View the catalog page, click here

Sizes: 1/8" to 1"; Temperature Limit: 540°F; pH Range: 0-14; Shaft Speed: to 1000 FPM; Pressure: to 215 PSI in rotary pumps, 3600 PSI static.

Description: 2290 is a firm and dense packing that is tightly woven to eliminate large voids. Each filament is thoroughly impregnated with PTFE dispersion before braiding. This serves as a sealant between individual fibers to prevent any leaking through the braid structure. Through a bleaching and shrinking process, all carbonaceous material has been removed and greater dimensional stability has been attained.

Applications: Designed for valves, expansion joints, reciprocating and rotary shafts handling corrosive chemicals, solvents, and gases, with exception of molten alkali metals.

Service: Especially suited for services where no organic materials or lubricants other than PTFE are allowed.

Style 2777 - Synthetic Fiber PTFE Impregnated Packing

CGG7xxxC

S09P6View the catalog page, click here

Sizes: 1/4" to 1"; Temperature Limit: 500°F; pH Range: 1-13 (except concentrated, hot sulfuric or nitric acid).; Shaft Speed: to 1950 FPM.

Description: Interlock braid synthetic fibers impregnated with PTFE. The individual fibers are lubricated using a special process that assures thorough lubrication for a longer packing life. This is a high performance packing well suited to applications where graphite impregnation may not be acceptable.

Applications: This packing can handle steam, water, acids and other chemical and solvent applications. Regularly used in chemical plants with reciprocating pumps.

Style 3100A - Aramid Fiber Packing

CGG7xxxC

Sizes: 1/8" to 1"; Temperature Limit: 540°F; pH Range: 2-12; Shaft Speed: to 2950 FPM.

Description: Interlock braid using aramid filaments treated individually with PTFE suspensoid. The packing is also lubricated with a silicon-based compound for quick and easy break-in.

Applications: Centrifugal, rotary and reciprocating pumps, valves.

Service: 3100 is a durable packing able to withstand granular and abrasive applications. It is recommended for service in superheated steam, slurries, petroleum derivatives, solvents, chemicals and liquid gases.

 

Style 3300 - Expanded PTFE/Graphite Packing

CGG7xxxC

S09P7View the catalog page, click here

Sizes: 1/8" to 1"; Temperature Limit: 540°F; pH Range: 0-14; Shaft Speed: to 4900 FPM.

Description: Interbraided PTFE/Graphite fiber, graphite particles encapsulated in an expanded PTFE matrix. Recommended for corrosive services that are suitable for graphite/PTFE.

Applications: Reciprocating and rotary shafts, valve stems.

Style 400 - Pure Flexible Graphite Packing

CGG7xxxC

S09P8View the catalog page, click here

Sizes: 1/64", 1/32", 1/16", and 1/8"; Temperature Limit: -328°F to 900°F air, 1200°F steam; Pressure Limit: 2000 PSI; Sheet Size: 39.4" x 39.4".

Description: A flexible graphite sheet. The expanded graphite flake particles are mechanically locked together and adhesive bonded and laminated to the requited thickness. Note: Available with 316SS foil insert.

Applications: Flexible graphite sheet has pressure-temperature sealability capabilities that are far superior to reinforced non-asbestos sheet products. It is resistant to chemical attack by virtually all organic and inorganic fluids with the exception of concentrated, highly oxidizing acids. Gaskets cut from flexible graphite sheet seal with low to moderated bolt loads and conform to irregular flange sealing surfaces with both smooth and coarse surface finishes.

Style 533N - Non-Asbestos Sheet with NBR Binder

CGG7xxxC

S09P9View the catalog page, click here

Sizes: 1/64", 1/32", 1/16", 3/32", 1/8", 3/16" and 1/4"; Temperature Limit: -40°F to 750°F; Pressure Limit: 1370 PSI; Sheet Size: 59" x 63".

Description: A compressed non-asbestos sheet gasket produced from aramid and synthetic fibers bonded with NBR. Note: Available with SBR binding.

Applications: Water, brine, mild acids, alkalis, air, oil, solvents, and refrigerants.

Style 555 - Wire Inserted Non-Asbestos Sheet

CGG7xxxC

Sizes: 1/32", 1/16", 3/32, and 1/8"; Temperature Limit: -40°F to 720°F; Pressure Limit: 1450 PSI; Sheet Size: 59" x 63".

Description: A compressed non-asbestos sheet gasket produced from aramid and synthetic fibers reinforced with a woven wire mesh and bonded with NBR. Recommended for sealing applications where temperature and pressure fluctuate. Note: Available with or without graphite on both sides.

Applications: Saturated steam, water, brine, mild acids, alkalis, oils, solvents, and refrigerants.

 

Style 850 - Compressed Carbon Fiber Sheet with NBR Binder

CGG7xxxC

S09P10View the catalog page, click here

Sizes: 1/64", 1/32", 1/16", 3/32, and 1/8"; Temperature Limit: -40°F to 840°F; Pressure Limit: 1900 PSI; Sheet Size: 59" x 63".

Description: A compressed non-asbestos sheet gasket produced from carbon and graphite bonded with NBR.

Applications: Saturated steam, water, brine, mild acids, alkalis, air, oils, solvents, and refrigerants.

Style 511 - Compressed Sheet with SBR

CGG7xxxC

S09P11View the catalog page, click here

Sizes: 1/64", 1/32", 1/16", 3/32", 1/8", 3/16", and 1/4"; Temperature Limit: -40°F to 650°F; Pressure Limit: 600 PSI; Sheet Size: 59" x 63".

Description: A general service compressed fiber sheet, SBR binder. Note: Available in severe service with 1100°F and 3100 PSI limits. Also, available in hot oil and petroleum resistant with 1000°F and 2300 PSI limits. Additionally, available in acid resistant with 850°F and 1230 PSI limits.

Applications: Saturated steam, water, brine, mild acids, alkalis, and air.

Style 575 - Wire Inserted Compressed Sheet with SBR

CGG7xxxC

S09P12View the catalog page, click here

Sizes: 1/32", 1/16", 3/32", and 1/8"; Temperature Limit: -40°F to 1000°F; Pressure Limit: 3050 PSI; Sheet Size: 59" x 63".

Description: A premium service compressed fiber sheet reinforced with woven wire mesh bonded with SBR. Recommended for sealing applications where temperature and pressure fluctuate.

Applications: Saturated steam, water, brine, mild acids, alkalis, air, oils, petroleum, solvents, and refrigerants.

Style 600 - Red Rubber Sheet

CGG7xxxC

Sizes: 1/16", 3/32", 1/8", 3/16", and 1/4"; Temperature Limit: -20°F to 180°F; Tensile: 400 PSI; ASTM: D-2000

Description: Remains pliable under service conditions and has low flow under bolting pressures. This compound does not readily creep or blow out under normal temperatures or pressures.

Service: An exceptionally good material for use against hot or cold water, air and low pressure saturated steam, not exceeding 50 PSI.

 

Style 610 - Pure Gum (Live) Rubber Sheet

CGG7xxxC

S09P13View the catalog page, click here

Sizes: 1/16", 3/32", 1/8", 3/16", 1/4", 3/8", 1/2", 5/8", and 3/4"; Temperature Limit: -20°F to 140°F; Tensile: 1700 PSI; ASTM: D-2000.

Description: Pure vegetable rubber compound for softness and tensile strength. An excellent sealing material for applications involving light bolt pressures or extreme flange irregularities.

Service: Hot or cold water, aqueous solutions (except concentrated Sulphuric acid and Nitirc acid).

Style 612 - Buna-N Diaphragm Sheet

CGG7xxxC

Sizes: 1/16", 3/32", 1/8", 3/16", and 1/4"; Temperature Limit: -20°F to 200°F; Tensile: 1000 PSI; ASTM: D-2000.

Description: A high quality nitrile sheet with nylon reinforcement.

Service: This diaphragm sheet is suitable for oil, grease and solvent services.

• Note: Cloth inserted available yielding up to 200°F and 700 PSI limits.

 

Style 612N - Neoprene Diaphragm Sheet

CGG7xxxC

S09P14View the catalog page, click here

Sizes: 1/16", 3/32", 1/8", 3/16", and 1/4"; Temperature Limit: -20°F to 200°F; Tensile: 1000 PSI; ASTM: D-2000.

Description: A high quality nitrile sheet with nylon reinforcement.

Service: This diaphragm sheet is suitable for oil, grease and solvent services.

• Note: Cloth inserted available yielding up to 200°F and 700 PSI limits.

Style 641 - Vegetable Fiber Sheet

CGG7xxxC

Sizes: 1/32", 1/16", 3/32", 1/8", 3/16", and 1/4"; Temperature Limit: 250°F.

Description: Manufactured from tough vegetable fiber impregnated with a chemical binder to resist the penetration of liquids. It is heavily compressed during manufacture to close tolerances.

Service: Designed especially for use against gasoline, oil, benzene, grease, hot and cold water.

 

Style 645 - Cork and Neoprene Sheet

CGG7xxxC

S09P15View the catalog page, click here

Sizes: 1/32", 1/16", 3/32", 1/8", 3/16", and 1/4"; Temperature Limit: 275°F; Pressure Limit: 300 PSI.

Description: The material offers exceptional resiliency and conformability.

Service: Cork/neoprene manufactured sheet material is resistant to oils, fuels, weather and water.

Style 2400 - PTFE Sheet

CGG7xxxC

Sizes: 1/64", 1/32", 1/16", 3/32", 1/8", 3/16", and 1/4"; Temperature Limit: -328°F to 500°F; Tensile: 1500 PSI.

Description: Inert to almost all chemicals, it cannot be dissolved, and exhibits no moisture absorption. It is best known for its chemical resistance. Electrical properties are excellent. PTFE has an extremely low coefficient of friction. Very few materials will stick to it.

Service: Can handle virtually all chemicals with the exception of molten alkali metals and elemental flourine.

 

Style 700 - Viton

CGG7xxxC

S09P16View the catalog page, click here

Sizes: 1/32", 1/16", 3/32", 1/8", 3/16", and 1/4"; Temperature Limit: -10°F to 450°F; Tensile: 1000 PSI.

Description: VITON® (FLUOROELASTOMERS) are high technology elastomers designed for extreme heat, oil and chemical resistance. Commercial grade. Smooth plate finish or light fabric finish. 75 Durometer.

Service: Products are nearly equal to silicone materials in heat resistance while resisting aliphatic aromatic and halogenated hydrocarbons, concentrated acids and alkalis, also animal and vegetable oils.

• Note: Also available with cloth insert, PN: 700CI. * Viton is a registered trademark of Dupont Corp.

Style CCS - Closed Cell Sponge

CGG7xxxC

Sizes: 1/8", 3/16", 1/4", 3/8", 1/2", 5/8", 3/4" and 1"; Temperature Limit: -40°F to 160°F; Tensile: 1500 PSI.

Description: Natural rubber closed cell sponge.

Service: Sealing water tight doors. Excellent for insulating sound and vibration, dampening and shock absorbin

• Note: Available in sheet or rubber strips cut to order.

 

Style WPGT - Woven PTFE Gasket Tape

CGG7xxxC

S09P17View the catalog page, click here

Width: 1/2", 3/4", 1/4", 1", 1-1/4", 1-1/2", and 2"; Thickness: 1/8" and 1/4"; Temperature Limit: 500°F; Pressure Limit: 360 PSI; pH Range: 0 - 14, except molten alkali metals.

Description: Woven PTFE yarns in a flat, tube-like construction, which is impregnated with PTFE and can be treated with an inert lubricant (No. WPGT WET) or furnished without the lubricant (No. WPGT DRY).

Service: It can handle virtually any chemical service with the exception of molten alkali metals. Commonly used for sealing flanges and vessel tank lids.

Style ALLVALVE - Expanded PTFE Valve Stem Packing

CGG7xxxC

Width: 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 3/8", 1/2", and 5/8"; Temperature Limit: 600°F; Pressure Limit: 1450 PSI; pH Range: 0 - 14, except molten alkali metals and elemental flourine.

Description: 100% virgin expanded PTFE which in a braid-over-core construction with a round cross section. This construction produces a firm but conformable packing that handles high pressures.

Service: Easily conforms to worn valve stems and stuffing boxes, yet forms a very high density packing when compressed.

 

Style ALLJOINT - Expanded PTFE Joint Sealant

CGG7xxxC

S09P18View the catalog page, click here

Width: 1/8", 3/16", 1/4", 3/8", 1/2", 5/8", 3/4", 1", available in sizes up to 8" wide; Temperature Limit: 600°F; Pressure Limit: 2900 PSI; pH Range: 0 - 14, except molten alkali metals and elemental flourine.

Description: 100% virgin expanded PTFE which is much more flexible than regular PTFE and conforms to irregular and rough surfaces. This material is easier to compress and exhibits excellent resistance to creep and cold flow. Joint sealant is supplied as a continous tape with a self-adhesive backing strip to facilitate easy installation.

Service: Easily conforms to seal flanges for water, air, heat exchangers, etc.

Style RG - Ring Gaskets

CGG7xxxC

S09P19View the catalog page, click here

Sizes: From 1/2" to 24" ID nominal pipe size; Thickness: 1/16" and 1/8".

Description: Ring gaskets are available in non-asbestos, PTFE, PTFE envelope with filler, other materials available but not listed. Used for sealing flanges.

Style FFG - Full Face Pipe Flange Gasket

CGG7xxxC

S09P28FFGView the catalog page, click here

Sizes: From 1/2" to 24" ID nominal pipe size; Thickness: 1/16" and 1/8".

Description: Full face pipe flange gaskets are available in non-asbestos, PTFE, PTFE envelope with filler, other materials available but not listed. Used for sealing flanges.

Style RGT - Ring Gasket with Tab

CGG7xxxC

S09P21View the catalog page, click here

Sizes: From 1/2" to 24" ID nominal pipe size; Thickness: 1/16" and 1/8".

Description: Ring gasket with tabs are available in non-asbestos, PTFE, PTFE envelope with filler, other materials available but not listed. Used for sealing flanges, tab provides ease of handling.

"O" Ring Kits and "O" Ring Cord

CGG7xxxC

S09P30ORingKitCordView the catalog page, click here

Solve your "O" Ring replacement problems fast with this kit containing 382 rings in the 30 most popular sizes. Rings conform dimensionally to 568 universal series also AN-6227 sizes. Standard Kit is of 70 durometer Nitrile (Buna-N) compound for oil and fuel resistance - suitable for temperatures from -40° to 250°F. Specify H-70 Kit.

Other kits available:

H70-M, 401 piece Buna-N metric O-Ring kit 32 sizes.

H-90, Buna-N 90 Durometer

N-70, Neoprene 70 70 Durometer

E-70, EPDM 70 Durometer

PTFE, S-70, Silicone 70 Durometer

V-70, Viton 70 Durometer

V-90, Viton 90 Durometer

* Viton is a registered trademark of Dupont Corp.

Style 1000FG - Fiberglass Cloth, Tape and Rope

CGG7xxxC

S09P311000FGCFGTFGRView the catalog page, click here

Properties of Fiberglass

Material: Will not burn.

Service Temperature: 1000°F (538°C)

Thermal Conductivity @ 73°C: K Factor of .388

Resistance to Abrasion: Good

Resistance to Acids: Good, except hydrofluoric, hot phosphoric and wet hydrogen chloride.

Resistance to Alkalis: Fair to Good

Effect of Bleaches & Solvents: Unaffected.

Resistance to Mildew, Rotting, Aging, and Sunlight: Excellent.

Fiberglass tape is typically used for: wrapping steam tracer lines, hose, piping, tadpole tapes, gasketing and curtains for high temperature ovens.

Fiberglass rope is highly flexible twisted and formed rope in various diameters. Typically packaged on 25 lb. spools which can be broken for smaller orders.

Fiberglass cloth is used for: electrical insulation; heat shields; welding; stress relieving; pad cover insulation; gasket products; fire blankets; fire curtain; expansion joints; flue ducts; etc.. These cloths are woven of highly texturized fiber glass yarns. Also available as tacky cloth with brass wire inserted and with rubber compound to provide strength and conformability, ideal for manhole, handhole, and tadpole gaskets. Service rating +400°F. Pressure rating 180 PSI.

Spiral Wound Gasket

CGG7xxxC

Spiral wound gaskets are available in various sizes, pressures, materials, etc.. Please contact us with your spiral wound gasket requirements.

 

Packing Gasket Cutter

CGG7xxxC

The packing gasket cutter can be used to cut square, 30°, 45°, and 60° angles.

 

Rubber Switchboard Matting

CGG7xxxC

Rubber switchboard matting is used for electrical grounding.

 

Anti-Fatigue Grating and Matting

CGG7xxxC

Anit-fatigue grating & matting honeycomb comfort matting is used for providing a non-slip surface in work areas. The black is SBR and the red is oil resistant nitrile. Features interconnecting studs to facilitate joining pieces together.

 

Rubber Strip Packing / Sticky Back Rubber Strip

CGG7xxxC

S09P24View the catalog page, click here

Rubber strip packing is available in various thicknesses and is available with or without adhesive sticky back. Excellent for sealing doors.

Copyright © 2017 - Accord International, Inc. - All Rights Reserved.

Site Map