Couplings and Fittings

Accord offers a complete line of hose couplings and accessories in various alloys. Cam and groove couplings are available in several styles including: standard cam and groove couplings, auto-locking cam and groove couplings, self-locking cam and groove couplings, dry-disconnect cam and groove couplings, flanged cam and groove couplings and reducing cam and groove couplings.

Additional couplings include: ground joint couplings, steam quick disconnect couplings, universal (crowsfoot) couplings, sand blast couplings, long and short shank couplings, combination nipples, quick acting couplings, industrial quick connect couplings, branch piping coupling, etc.

Accord stocks a wide variety of two, four and six bolt clamps, spiral double bolt clamps, T bolt clamps, worm gear clamps in various alloys. Brass and stainless steel ball valves and gate valves are stocked.

Standard Cam and Groove Couplings

CGG7xxxC CGG7xxxC CGG7xxxC

S08P03CG1View the catalog page, click here

CGG7xxxC CGG7xxxC CGG7xxxC

S08P04CG2View the catalog page, click here

Cam and Groove Dust Cap, Dust Plug and Reducing Cam and Groove Couplings

CGG7xxxC CGG7xxxC CGG7xxxC

S08P05CG3View the catalog page, click here

Operation of Cam & Groove Couplings: To connect simply slide the adapter into the coupler and with normal hand pressure and press the cam arms down. To uncouple lift the cam arms and remove the adapter. Cam and groove couplers are also available with auto-locking and self-locking handles.

Cam and groove couplings range in sizes from 1/2" to 8". Cam and groove couplings are available in: 316 stainless steel, aluminum, brass, cast iron and polypropylene. ISSA and IMPA codes: 3518.

Cam and Groove Spool Adapters, Spool Couplers, Reducing Adapters and Reducing Couplings

CGG7xxxC CGG7xxxC CGG7xxxC CGG7xxxC

S08P06CG4View the catalog page, click here

Reducing Cam and Groove Couplers and Adapters

CGG7xxxC CGG7xxxC CGG7xxxC CGG7xxxC

S08P07CG5View the catalog page, click here

Cam and Groove Gaskets and Cam and Groove Replacement Arms with handle, ring, pin and safety clip assembly

CGG7xxxC CGG7xxxC

S08P08CG6View the catalog page, click here

Cam and Groove 90° Elbows , Part A, Part B, and Part C

CGG7xxxC CGG7xxxC CGG7xxxC

 

Cam and Groove 90° Elbows, Part D, Part E, and Part F

CGG7xxxC CGG7xxxC CGG7xxxC

 

Cam and Groove 90° Elbows Coupler x Coupler, Coupler x Adapter and 45° Elbows Coupler x Coupler, Coupler x Adapter

CGG7xxxC CGG7xxxC CGG7xxxC CGG7xxxC

S08P09CG7View the catalog page, click here

Flanged Cam and Groove Couplings in both TTMA flange and 150# Drilling

CGG7xxxCCGG7xxxCCGG7xxxCCGG7xxxC

 

Cam and Groove Couplings with Sight Flow Indicators and Tank Truck Flanged Sight Flow Indicators

CGG7xxxC CGG7xxxC

S08P10CG8View the catalog page, click here

Cam & groove couplings with sight flow indicators are designed for dry bulk transfer hose. Tank truck flanged sight flow indicators are designed to work with the tank truck flanged butterfly valve commonly found on gasoline trucks.

Dry Disconnect (Dry Break) Couplings

item2 item1

S08P11DryDisconnectView the catalog page, click here

Dry disconnect (dry break) couplings are used in the petroleum industry, transportation, marine operations, tank farms and in plant applications. Dry disconnect couplings prevent spills. When you are moving valuable or hazardous fluids, the last thing you need are spills. Spills can be costly and dangerous to people and the environment. Standard seals for dry disconnect couplings are Viton, and can be easily replaced with Chemraz 500, Kalrez, or any other style of material needed for service.

Ground Joint Couplings

item4 item3 item5 item6 item7

Ground joint couplings are recommended for steam hose service up to 450°F. These couplings are also widely used with high or low pressure air, water, liquid petroleum gas, fluid petroleum products, and chemicals. To be used with interlocking clamp. Ground joint couplings are available in malleable iron, brass, and stainless steel.

 

Steam Quick Disconnect Couplings

item9

S08P14GJSteamView the catalog page, click here

Designed exclusively for steam applications, the Socket and Plug are solid brass with stainless steel springs and locking balls. The socket has a large plated steel sleeve especially designed for easier gripping with gloves. Two ethylene propylene O-rings in the Socket provide double protection against leaks. Rated to 100 PSI Saturated Steam (338°F).

Universal / Crowsfoot Couplings

item8

S08P157223View the catalog page, click here

Universal (Crowsfoot) couplings are recommended for air and water service up to 110 PSI @ 70°F. Universal couplings are available in malleable iron, brass and 316 stainless steel. Only one safety clip is required for each universal coupling. Note: also available in 4-lug for sizes ranging from 1-1/4" to 2". ISSA and IMPA codes: 351021, 351022, 351023, 351024, 351026, 351027, 351028, 351029, 351031, 351032, 351033, and 351034.

Sand Blast Couplings

item10

S08P16SandBlastView the catalog page, click here

All sand blast couplings are supplied with screws and gaskets. Installation: 1) Ends of hose must be cut square to fit snug against metal end. 2) Holding hose tight to end of fitting, insert screws and turn in full putting screw 180° from first to insure best centering. 3) After all screws have been placed, check tube opposite screws to be sure screws have not penetrated completely through. 4) On quick couplings insert safety clips.

Hose End x Crowfoot are designed for use on sand blast hose.

Hose End Nozzle Holder are designed for use on sand blast hose, nozzle holders have 1-1/4" NPSM thread.

Zinc plated phillips head screws for sand blast couplings 10 pieces x 5/8" thread.

Brass Long Shank Couplings and Brass Short Shank Blast Couplings

item11

S08P17251268View the catalog page, click here

Brass long shank couplings are commonly used on low pressure air or steam hose. The long shanks accommodate two or more clamps for safe sealing of coupling to hose.

Brass short shank couplings are cast of high grade red brass for maximum strength. Recommended when hose is used around salt water, in mines and when a non-sparking coupling is needed. Note: Also available with aluminum shank and brass nut. ISSA and IMPA codes: 330865, 330866, 330867, 330868, 330869, 330870, 330871, 330872, 351061, 351062, 351063, 351064, and 351065.

Combination Nipples and Hose Menders

item12

S08P13KCNHMView the catalog page, click here

Combination nipples are made from tubular stock, to fit straight in the end of the hose. Available in threaded, weld beveled and groved ends in unplated steel, plated steel, 316 stainless steel, brass and aluminum. Combination nipples are commonly used with suction and discharge hoses.

Hose menders are used for coupling two pieces of hose. The working pressure of menders will vary with the size and construction of the hose, the type and number of clamps used, clamp placement, proper installation of clamps, temperature and product being conveyed. Note: Also available with a ring in the middle.

Japanese Pneumatic Quick Couplings

item14

S08P19JapaneseQuickView the catalog page, click here

SH (Coupler x Hose Barb) and PH (Plug x Hose Barb) quick couplings are available in Chrome plated steel and Stainless Steel. ISSA and IMPA codes: 351201, 351202, 351203, 351204, 351205, 351206, 351221, 351222, 351223, 351224, 351225, 351226, 351231, 351232, 351233, 351234, 351235, 351236, 351251, 351252, 351253, 351254, 351255, and 351256.

SM (Coupler x Male BSP) and PM (Plug x Male BSP) quick couplings are available in Chrome plated steel and Stainless Steel. ISSA and IMPA codes: 351302, 351303, 351304, 351322, 351323, 351324, 351332, 351333, 351334, 351352, 351353, and 351354.

SF (Coupler x Female BSP) and PF (Plug x Female BSP) quick couplings are available in Chrome plated steel and Stainless Steel. ISSA and IMPA codes: 351401, 351402, 351403, 351421, 351422, 351423, 351431, 351432, 351433, 351451, 351451, and 351453.

Branch Piping Quick Couplings

item13 item23

Japanese type couplings are used for simultaneous connection of multiple hose to a single air supply source. Two types are available Line type (Type L), and Star type (Type S) in chrome plated steel only. Centralized piping can be set-up in any desired location. The branch inlet includes: 1 each of 400SH and 1 each 400 PM. The branch outlet includes the following: 4 each 20 SM and 1 each 40 SM. Individual Japanese type quick couplings are available in stainless steel, as well as chrome plated steel. ISSA and IMPA codes: 351651, 351652, 351653, and 351654.

 

M42 x 2mm Cast Bronze Air Hose Couplings

item15

S08P187335200View the catalog page, click here

M42 x 2mm cast bronze air hose coupling have a female threaded pin lug connection for use with the ships male threaded air outlet (JIS B 0207). The conical shaped insert provides a metal-to-metal mechanical seal. ISSA and IMPA codes: 351051, 351052, 351053, 351054, 351055, 351056, and 351057. Available in 6mm, 8mm, 9mm, 12mm, 15mm, 19mm, and 25mm diameter hose shank. The M42 x 2mm coupling is available in a threaded hose cap, as well as in stainless steel please specify when ordering.

Two (2), Four (4) & Six (6) Bolt Interlocking Clamps

item16

S08P227365View the catalog page, click here

For use with tank cleaning couplings, ground joint couplings, interlocking type inserts and universal couplings. Interlocking couplings should be used for a securely locking coupling to hose. Note: Larger sizes are available upon request. Interlocking clamps are available in malleable iron, brass, and stainless steel. ISSA and IMPA codes: 614092, 614093, 614094, 614095, and 614096.

T-Bolt Clamps, Double Bolt, Spiral Double Bolt, and Worm Gear Clamps

item17 item19 item20 item21 item18

T Bolt clamps are also available in all stainless steel and stainless steel band with zinc plated screw.

S08P23301View the catalog page, click here

Double bolt clamps are made of rugged plated malleable iron with machine bolts and hex nuts. The inner surface has dual gripping ridges. Bolt lugs are reinforced to prevent bending out of alignment. ISSA and IMPA codes: 614080, 614081, 614082, 614083, 614084, 614085, 614086, 614087, 614088, 614089, 614090, and 614091.

S08P24DBCSDBCView the catalog page, click here

Double bolt clamps are made of rugged plated malleable iron with machine bolts and hex nuts. The inner surface has dual gripping ridges. Bolt lugs are reinforced to prevent bending out of alignment. ISSA and IMPA codes: 614080, 614081, 614082, 614083, 614084, 614085, 614086, 614087, 614088, 614089, 614090, and 614091.

Spiral Double Bolt Clamps are recommended to be used with convoluted PVC hose, etc.. Series "WG". For adequate holding power, a single clamp may be used on each end of 4" size. Two clamps are recommended for each end on sizes 6" ID hose and above.

S08P25WGCSWGSSView the catalog page, click here

Worm gear clamps are serrated, to tighten or loosen the clamp simply turn the screw hexagon screw. Available in all stainless steel or zinc plated band and galvanized screw. ISSA and IMPA codes: 614051, 614052, 614053, 614054, 614055, 614056, 614057, 614058, 614059, 614060, 614061, 614065, 614066, 614067, 614068, 614069, 614070, 614071, 614072, 614073, 614074, and 614075.

To set the center punch clamps use a mallet to strike the locking tool used to tighten the band of the clamp. ISSA and IMPA codes: 614101, 614103, 614104, 614105, 614106, 614107, 614109, 614110, 614111, 614112, 614113, 614115, 614116, 614117, 614118, and 614119.

Ball, Gate and Butterfly Valves

item22 item24 item25

S08P26BVSVGVView the catalog page, click here

These 2 piece ball valves are constructed of forged brass. Designed for commercial and industrial use on steam, water, oil or gas. The conventional port ball valve has excellent flow characteristics.

• Note: Also available in UL Listed. ISSA and IMPA codes: 752401, 752402, 752403, 752404, 752405, 752406, and 752407.

Accord's stainless steel one piece ball valves are designed for commercial and industrial use on water, oil or gas. The full port ball valve has excellent flow characteristics. ISSA and IMPA codes: 752411, 752412, 752413, 752414, 752415, 752416, 752417, and 752418.

Gate valves constructed of heavy duty body and bonnet are connected with a tight metal leak proof seat. It has a screwed bonnet, non-rising stem, solid wedge disc, and integral seats. Recommended for non-steam use in commercial and residential applications. May be repacked while in service under pressure.

Copyright © 2017 - Accord International, Inc. - All Rights Reserved.

Site Map